HALLOWEEN COSTUME IDEAS:

DIY Homemade Energizer Bunny Costume

This is a NO-SEW COSTUME.

How to make an Energizer Bunny Costume out of a pair of adult footies:

Start with one pair of Pink Adult Footed Pajamas

Make or purchase a
Pair of Bunny Ears
Available on our site - click here
Or at costume shops - or make a pair from felt, a headband and wire.
(The ears we sell do not stand up by themselves! For the photo we cut little holes in the headpiece and ears and bent a coat hanger up as an armature to support them.)

Make a
Pair of Comically Large Drumsticks
from Posterboard and Tin Foil.
Form a cylinder from Posterboard for the stick, form a wider cylinder for the "Beater".
Fold and tape one end of the beater and spray paint it Red.
Crumple Tin Foil around the end and slip the beater on - secure with a little tape.

Make a
Drum
See photo below.
Cut two large circles of Cardboard, cover them with Posterboard, cut an 8" by 2' piece of Cardboard - bend into a square or triangle and tape it between the two round drum sides (see pic below).
Cut long 10" wide strips of White Posterboard. Place the 2 circles with a cardboard square thing on one of them and tape it every 8 inches as you cover the outside (see pic below).
Cut Red Paper into thin strips and tape it in a zig-zag pattern on the outside (or just draw them with a magic marker.
Emblazon the sides with the Energizer logo (use magic markers).

Slip a piece of fabric through the edge strip and tie it around your torso.
Add a large white fabric circle to your chest and slip on a pair of Ray Bans Shades.

Make a pair of
Mittens
Click here to see photo of mitten shapes on the Care Bears Costume page.
Staple them shut, turn them inside out.

Do not drive wearing the drum, mittens or shades.
Take the ears off if you get pulled over.
:)

PLEASE SEND US YOUR PHOTOS!

If you send us photos of yourself in your footies we'll send you a free pair of Elvis Glasses!

All you have to do is send your photos to:

ELVISGLASSES4PHOTOS
AT
YAHOO.COM

and we'll put them on our site.